10″ Display SERIE 2 Medical Gas Alarm Zone

To quote, you must specify as follow:

  • Number and type of medical gas that you need in the alarm.
  • Wall depth to embedding box (10cm/14cm)
  • If the medical gas alarm zone will be connected to a network system
  • If you have good quality INTERNET


Medical Gas Alarm Zone to high and low pressure detection Model SERIES 2 with 10 “color LCD full color display screen, wall mounting cabinet and complies with NFPA99-2015.


  • ABS Thermoplastic injection front meeting NFPA 286, galvanized steel sheet alarm mounting chasis made.

Gas Number:

  • To 1 and up to 8 simultaneous medical gases in the medical gas alarm zone.


  • Pressure and vacuum readings on real time.
  • NFPA99 color and Medical gas Name.
  • Flashing Alarms in each medical gas Module.
  • Disconnections and crossing of medical gas sensors.
  • Display of area name where the medical gas alarm zone will be located.

Alarm Events:

  • High and Low pressure Alarms on real time.
  • Signal interruption or disconnection in the sensors Alarm.
  • Cross connection of medical gas sensors Alarm.
  • On-screen warning when the alarm activation parameters are not those specified by the NFPA99-2015 code


  • RJ45 female ports for data input and output.
  • Dry contact relay port for data output (1 port).
  • RS485 communication protocol in SERIAL connection to connection with zone alarm groups and with Arigmed’s SERIES 2 master alarm panel.
  • Connection to INTRANET and EXTRANET (INTERNET) through the ARIGMED ETHERNET INTERFACE with HTML to view the system with remote devices such as PC, TABLET, SMARTPHONE via website.


  • Parameter modifications by user to change Units, cut-off levels for pressure and Hysteresis.
  • Editing Name of the area where the zone alarm will be located.




Medical Gas alarm zone require the follow complementary devices:
  • Wall box embedding (10 cm, 14 cm)
  • Female DISS CGA-V5 check valve coupling piping
  • Male DISS CGA-V5 medical gas sensor
  • 110-220v 50/60 Power supply
To a Network System Require the follow complementary devices:
  • Arigmed´s Master Panel Alarm SERIE 2
  • Arigmed´s Ethernet interface
  • HTML Arigmed´s Medical Gas web site subscription (user and password will be required).
  • Email user adress to receive status notifications of alarm events
  • UTP CAT6 data wiring on SERIAL mode connection with medical gas alarm zone to the arigmed medical gas master panel.
  • Good quality fix internet.


ficha comercial ALARMA DIG 8 GASES serie2 en INGLES1
error: Content is protected !!