Description

Medical Gas Outlet quick connect twin type Chemetron (Hook Coupling) + Ohmeda (Position Pin) inlet connection for each specific gas. Manufactured with NFPA99-2015 and ASTM B819 compliance codes (Clean for oxygen use).

Primary Valve (Back Assembly):

  • Brass made Primary valve 360°rotation, copper piping extention “K" type 10mm (internal diameter).
  • Polypropylene injection ckeck valve.
  • Thermoplastic injection TPVs FDA grade seals.
  • Hardware Modular assembly to wall and architectural medical gas equipments, carbon steel sheet 18 gauge nickel finish made.
  • Stainless steel spiral locks.
  • “Pin-Guide" No cross connection safety system die-cut corresponding to a specific medical gas type to Rough-in assembly insertion.

Secondary Valve (Rough-in Assembly):

  • Stainless steel front plate made with brass feeding valve, it includes a plunger for connection and disconnection of secondary equipment, fastening to the primary valve is by millimeter screws.
  • Chemetron (Hook Coupling) + Ohmeda (Position Pin) inlet connection for each specific gas correspond to Chemetron and Ohmeda technology.
  • Brass and ABS plastic injection made check valve.
  • Thermoplastic injection TPVs FDA grade seals.
  • Stainless steel spiral locks.
  • ABS plastic injection trim wall plate chrome finish, same material to architectural equipments trim plate, chrome finish.
  • “Pin-Guide" No cross connection safety system corresponding to a specific medical gas type to Back-assembly reception.
  • zamak chrome finish trim wall plate option (upon request).

Medical Gas Outlet Flow:

  • 240 L.P.M. gas flow (if diameters of the main medical gas piping allow it).
  • 90 L.P.M. to medical vacuum extraction (if diameters of the main medical vacuum piping allow it).

Load Capacity:

  • 450g Maximum load capacity.

Specifications

Available for:
  • Medical Oxygen
  • Medical Air
  • Medical vacuum
  • Nitrous Oxide

Brochure

Medical Gas Outlets-Inlets Model 2019_1
error: Content is protected !!