Medical Gas Outlets suitable for use with MRI

Specifications

⚙️ Technical Specifications

🔧 Medical Gas Outlet Connection

• Manufactured in NON-FERROMAGNETIC MATERIALS.
• Inlets available in the full range of ARIGMED brand outlets.
• Safety pin with position registry to prevent gas cross-connection (between primary and secondary valve).
• Complies with NFPA 99 and ASTM B819 (medical grade, clean for oxygen use).

---

🛠️ Primary Valve

• Brass base with 360° rotation.
• Extension with copper tube type “K”, inner diameter: 10 mm.
• Automatic shut-off valve (check) in injected polypropylene.
• TPVs thermoplastic seals, FDA grade.

Available Versions:

• • Wall-mounted: modular bracket in carbon steel sheet, nickel finish, gauge 18.
  • Headwall-mounted: same as above.
  • Ceiling-mounted: upon prior specification.
  • Spiral locks in stainless steel.
  • Mounting bracket with specific registry by gas type, for insertion of the guide pin of the secondary valve, compatible with U.S. brands, manufactured in aluminum.

---

🔩 Secondary Valve

• Flat front in aluminum.
• Inlets available in the full range of ARIGMED brand outlets.
• Fixed to the primary valve using metric screws.
• Automatic shut-off valve (check) in high-resistance ABS.
• TPVs thermoplastic seals, FDA grade.
• Spiral locks in stainless steel.
• Includes guide pin to prevent gas cross-connection, compatible with U.S. brands.

---

🧱 Mounting Frames

• Wall frame: made of high-resistance injected ABS plastic.
• Headwall frame: made of high-resistance injected ABS plastic.

---

💨 Available Connection Technologies

• Puritan Bennet
• Chemetron
• Ohmeda Diamond
• Chemetron + Ohmeda Diamond
• MC70 & MC70+M24 thread with locking nut for secondary equipment fixation
• DISS CGA V5

---

🎨 Color Identification

• According to NFPA 99
• According to ISO (specify standard if greater precision is required)

---

📈 Technical Parameters

Parameter	Value / Condition
Gas outlet flow rate	240 LPM (depending on supply diameter)
Extraction capacity	90 LPM (depending on vacuum pipe diameter)
Secondary load capacity	Maximum: 450 g
Operating pressure	50–55 PSI for all gases, 160–180 PSI only for nitrogen and instrument air
Maximum test pressure	100 PSI for all gases, 160–180 PSI only for nitrogen and instrument air

---

🔐 Safety and Compatibility

• Safety pin with registry to prevent gas cross-connection: Included
• Compatible with U.S. brand registries.

---

🛡️ Standards and Certifications

• Complies with: NFPA 99, ASTM B819
• Quality system: ISO 13485, ISO 9001

---

📘 Installation, Operation and Maintenance Manual

This document is protected and available exclusively for equipment of our brand. To request it:

1. Access the form in the Manuals and After-Sales Service section.
2. Send an email with the requested information.
3. Complete the corresponding form.