Description
Screw water lubricated type Oilfree Medical Air Compressor System Arigmed’s meeting NFPA99 and other Codes.
Screw water lubricated Type Oilfree Compressors:
- Water lubricated “Oil Free" screw compressors made of stainless steel, high temperature resistant bearings, compression units made in Germany in STAINLESS STEEL and designed for 50-55 PSI workimg pressure and 152 PSI maximum pressure.
- Soundproofing booth powder coating finish.
- Transmission by pulleys and bands with a standard 220v 60htz electric motor, (other voltages must be specified in advance to the factory).
- ISO 8571-1:2010 Equipment certificate.
Filter System:
- Moisture filters with element saturation reader and automatic drain.
Electric After Coolers:
- Refrigerated air cooling After-Coolers with 220V electric motor and made of stainless steel, copper tubing and aluminum heat sinks, includes a multiple connection block with relief, anti-return and automatic valves, moisture filter.
Moist Air Storage Tank:
- Air Storage Vessel manufactured with ASME specifications, 120 gallon capacity in vertical configuration.
- ASME stamped by the manufacturer.
- Manual and automatic drains.
- Level Valve.
Refrigerated Air Dryers:
- Refrigerated dryer system for air treatment, includes pre-filters and post-filters.
Dry Air Storage Tank:
- Air Storage Vessel manufactured with ASME specification, 240 gallon capacity in vertical configuration.
- ASME stamped by the manufacturer.
- Manual and automatic drains.
- Level Valve.
Control Panel:
- Electric-electronic control panel to coordinate the alternation, simultaneous use and stop functions, as well as the control of the Regeneration Air treatment system.
- NFPA99 specified alarm detection and maintenance alert, NEMA12 class enclosure.
- 7” (inches) touch screen for control and visualization of the operation status of the compressor.
Regenerative Air Dryers:
- Electrical valves Normally open, timed and controlled by the equipment control panel, drying temperature of -40°C, are included in the system in duplicate.
Medical air Filter System:
- Filters or moisture traps, 1 micron particle filter, optional anti-bacterial filters and final line regulator are included in the system in duplicate.
Air Quality Monitors:
- Monitor for High Level Detection of Carbon Monoxide.
- Monitor for detection of high level of dew point.
Data Relay Output:
- One relay output (dry contacts) for alarm transmission and connection to the master alarm panel for source equipment.
Designed for Use:
- Exclusively Medical in Clinics and Hospitals.
Compliance Regulations:
- NFPA99
System Certificates:
- To quote, user must be inform about Medical Air consumption required in CFM (standard cubic feet per minute) under all requires of NFPA99-2015 and 2018
- Consult Delivery Capabilities of each sytem in CFM on Technical Data Sheet.
- Indoor Use Only.
- The factory is not responsible in the case of equipment failure due to wrong calculation to size the equipment and lack of maintenance.