10″ Display SERIE 2 Medical Gas Alarm Zone

Specifications

⚙️ Technical Specifications. 🔧 Cabinet:

• Manufactured by injection molding of high-resistance ABS thermoplastic compliant with NFPA 286.
• Finished in white color.
• Installation options: recessed or surface wall mount (must be specified to the manufacturer).

🔢 Alarm Capacity (Number of gases):

• Configurable on screen from 1 up to 8 medical gas and vacuum modules per alarm.
• Maximum network capacity: up to 127 gas or surgical vacuum sensors connected to the master panel.

💡 Graphics and Visual Signals

• • Real-time reading of pressure and vacuum via 10″ full-color LCD display.
  • NFPA99 color option and nomenclature for each medical gas.
  • ISO color option and nomenclature for each medical gas.
  • Alarm flashing per gas module (on display).
  • Visualization of disconnections and cross-wiring of medical gas sensors.
  • Display of area name where the zone alarm will be located.
  • Possibility to duplicate any gas and/or vacuum module without exceeding the maximum limit of 8 modules.

🚨 Alarm Events

• • • • Alarm for real-time detection of high and low pressure and low vacuum levels.
      • Alarm for signal interruption in medical gas and vacuum sensors (disconnection).
      • Alarm for detection of sensor exchange or cross-wiring in medical gas and vacuum lines.
      • Screen warning when alarm activation parameters do not match those specified by NFPA99.

🔌 Communications

• • • • RJ45 female ports for data input and output.
      • Dry contact relay output port (1 port).
      • RS485 communication protocol via SERIAL connection for linkage with zone alarm groups and the Arigmed SERIES 2 master alarm panel.
      • Connection to INTRANET and EXTRANET (INTERNET) through the ARIGMED ETHERNET INTERFACE with HTML to view the system from remote devices such as PC, TABLET, SMARTPHONE via website.

🏭 User Functions and Modifications

• • • • User-modifiable parameters: unit change (psi or bar), pressure cutoff levels, and hysteresis.
      • Edit the name of the area where the zone alarm will be installed.

🎛️ Controls

• • • • Display button to mute alarm sound (automatic reset after 1 hour if pressure doesn’t normalize).
      • System test button on display.

📘 Installation, Operation and Maintenance Manual

• • • • Protected document, exclusive to branded equipment.
      • Request via email and form in the manuals and after-sales service section.

🔗 Required Complementary Equipment

• • • • Remote digital pressure/vacuum sensor connected to medical gas network.
      • Check valve DISS DEMAND CGA V-5 installed in supply piping.
      • Flush-mount box for electrical, data, and medical gas/vacuum connections.
      • Belden cable STP #8461ZH or #8208 for additional relay port (point-to-point connection, no splicing for relay system).
      • Minimum UTP CAT 6 data cable for serial connection to segment alarms (point-to-point, no splicing).
      • Electrical supply: 110–220V, 50–60 Hz.
      • Arigmed Ethernet Interface for HTML. Arigmed website for remote pressure system monitoring. (User system hosting on ARIGMED monitoring site may incur additional costs).
      • High-quality, fixed Internet access required.

⚠️ Avoidable Impacts

• • • • Voltage variations in electrical supply.
      • Use of emergency power supply generators as primary source.
      • Intermittent or unstable electrical supply.
      • Frequent power loss with repeated emergency generator activation.

🛠️ Installation Recommendations

• • • Verify physical grounding connection.
    • Install backup power system (No-Break).
    • Install surge suppressor for electrical discharge protection.