No products in the cart.
Medical Gas Alarm Zone RELAY type
*To a quote contact our technical and sales advisors. Your information must be valid and true (name, full address, email, phone number, country, postal code, I.D. tax status).
*We always require clear specifications in order to make a formal quote.
Description
Medical gas alarm panel electromechanical relay-type, designed to detect low pressure events in medical gases and vacuum levels in real time; Available exclusively in a surface-mounted wall cabinet, includes:
- Individual medical gas and vacuum modules with capacity for 1 up to 8 modules per alarm system
- Electromechanical relay system (dry contacts)
- Real-time visual and audible signaling for alarm events
- Exclusively available in cabinet for wall-mounted installation
- Can comply with NFPA 99 when installed with pressure switches featuring dual set points (for high and low pressure)
Specifications
⚙️ Technical Specifications
🔧 Cabinet
- Manufactured from special-extrusion aluminum profiles, alloy 6063, temper 5
- Finished with baked electrostatic paint
- Installation: surface-mounted on wall only
🔔 Electromechanical Relay-Type Alarm (Number of Gases)
- Modules available for 1 to 8 medical gases per cabinet
💡 Visual and Audible Indicators
- High-visibility green LED for normal status (per gas module)
- Flashing red LED for low pressure events (per gas module)
- Green LED indicating system is energized 110–220 VAC (for the full zone or area alarm)
- Audible buzzer for alarm events (cancelable only on-site)
🚨 Alarm Events
- Real-time detection of low pressure and vacuum level (per gas and vacuum module)
🔌 Communications
- One relay port (dry contact) per alarm unit
🎛️ Controls
- Button to mute alarm sound (automatic reset after 1 hour if pressure is not normalized)
- System test button
📘 Installation, Operation and Maintenance Manual
- Protected document, exclusive to brand equipment
- Request via email and form in the Manuals and After-Sales Service section
🔗 Required Complementary Equipment
- REMOTE dry-contact relay switch for positive pressure, per alarm signal of each gas module (high and low pressure), connected to the medical gas network – NOT INCLUDED
- REMOTE dry-contact relay switch for negative pressure/vacuum alarm signal, connected to the surgical medical vacuum system – NOT INCLUDED
- DISS DEMAND CGA V-5 check valve installed in the piping
- Flush-mounted box for electrical and data connections
- For networked systems: Belden STP cable #8461ZH or #8208 for additional relay port (point-to-point connection, no splices for relay system)
- Power supply: 110–220 V, 50–60 Hz
⚠️ Conditions to Avoid
- Voltage fluctuations in the electrical supply
- Use of emergency power generators as the main power source
- Unstable or intermittent electrical supply
- Frequent power losses triggering emergency power system repeatedly
🛠️ Installation Recommendations
- Verify physical grounding connection
- Install No-Break backup power system
- Install surge protector for protection against electrical discharges
Brochure
Download:No Available
Legal Notice
Intellectual and industrial property: All rights reserved.- All access to this website is subject to the following conditions: The reproduction, permanent storage and dissemination of the contents or any other use that has a public or commercial purpose is forbidden without prior written notice and approval of Grupo Arigmed S. de R.L. de C.V.
- All documents, images and contents, on this website are from the Intellectual property of Grupo Arigmed S. de R.L. de C.V., any type of copy, plagiarism or similarity in those (documents, images and contents), will be object of legal actions to avoid its use by unauthorized persons, organizations or companies, as well to compensate author´s damage caused.
