Medical Air Reciprocant Compressor System

Specifications

🧩 Medical Air Compression System – Oil-Free

🔧 Oil-Free Piston Compressors

• Type: Single-stage reciprocating, oil-free.
• Manufactured from injected aluminum.
• Bearings designed for high temperature.
• Compression and guide rings in PTFE loaded with carbon and graphite.
• Working pressure: 50–55 PSI
• Maximum pressure: 100 PSI
• External finish: high-temperature electrostatic powder coating (black).
• Belt and pulley transmission.
• Standard electric motor: 220 V / 60 Hz (other voltages must be specified with the factory in advance).
• Easy maintenance and spare parts availability.
• Made in Mexico.

---

🌬️ Air-Cooled Aftercoolers

1. Type: Mounted on belt guard.
2. Material: Injected aluminum with high-temperature electrostatic coating (black).
3. Includes multi-connection block with valves for:
   • Relief
   • Check
   • Automatic valves for each compression unit.

---

🛢️ Storage Tank

• Manufactured under ASME specification.
• ASME stamp available only for 120 gal and 240 gal versions.

---

🖥️ Electro-Electronic Control Panel

• Compressor alternating, simultaneous use, and shutdown functions.
• Automatic control of regeneration treatment system.
• Alarm detection in compliance with NFPA 99.
• Maintenance alert.
• Cabinet class NEMA 12.
• User interface: 7” touch screen for control and operation status display.

---

🧊 Regenerative Tower-Type Air Dryers

1. Duplicated system in compliance with NFPA99:
   • 1 tower in operation
   • 1 tower in standby
2. Timed, normally open electric valves, controlled from the system’s control panel.
3. Drying temperature: –40°C

---

🧪 Medical Air Filtration System

• Moisture traps and filters.
• Particulate filter for 1 micron.
• Optional antibacterial filters.
• Final line pressure regulator.
• Duplicated system for operational redundancy.

---

🔎 Air Quality Monitoring

• Carbon monoxide monitor: high level detection.
• Dew point monitor: detection of critical deviations.

---

🧲 Relay Outputs

• 1 relay output (dry contacts) for data transmission and connection to master alarm panel for source systems.

---

🏥 Application

• Exclusive medical use for clinics and hospital installations.

---

📏 Compliance Standards

• In accordance with NFPA 99 standard.

---

📦 Included Components

• Spring anti-vibration dampers for compression modules.
• Automatic valves to prevent backpressure.
• Temperature sensors for each cylinder in the compressor heads.
• Automatic moisture purge valves.

---

🧮 Available Configurations

• Duplex
• Triplex
• Quadruplex
• Five units
• Six units

For additional configurations, consult directly with the factory.

---

⚡ Electric Motor Power

Power (HP)	Power (KW)
5 HP	3.7 kW
7.5 HP	5.59 kW
10 HP	7.45 kW
15 HP	11.18 kW
20 HP	14.91 kW

---

🚨 Included NFPA 99 Alarms

• High dew point level
• High carbon monoxide level
• High operating temperature
• Simultaneous compressor operation
• Low outlet pressure
• High outlet pressure
• Additional alarm: Preventive maintenance

---

📘 Installation, Operation, and Maintenance Manual

This document is protected and available exclusively for equipment of our brand. To obtain it:

1. Access the form in the Manuals and After-Sales Service section
2. Send an email with the required data
3. Complete the corresponding form