No products in the cart.
Quick Connect Medical Gas Outlet MC70 (Swedish type)
*To a quote contact our technical and commercial personnel; Customer information must be valid and true (name, full address, email, telephone, country, zip code, I.D. tax).
**We always request clear specifications to make a formal quote.
Hi, I have a doubt of Quick Connect Medical Gas Outlet MC70 (Swedish type)
Description
Outlet-Inlet for medical gas distribution with quick-connect MC70 (Swedish) type, with stepped inlet for each specific gas.
- Compliance with NFPA 99, ASTM B819, SS EN 8752430, and SS EN ISO 9170-1
- Quick-connect compatible with MC70 (Swedish) technology.
- Do not use chlorine or its derivatives; may cause corrosion on metallic parts.
- Do not use oil or oil-based products.
- Made in Mexico, ARIGMED.
Specifications
⚙️ Technical Specifications
🔧 Medical Gas Outlet Connection
- Made of stainless steel and aluminum.
- Quick-connect inlet type MC70 (Swedish).
- Individual hook mount for each specific gas.
- Safety pin with indexed position registry to prevent gas crossover (between primary and secondary valve).
- Compliant with NFPA 99 and ASTM B819 (medical grade, oxygen-clean).
🛠️ Primary Valve
- Brass base with 360° rotation.
- Extension with type “K” copper tubing, internal diameter: 10 mm.
- Automatic shut-off valve (check) in injection-molded polypropylene.
- FDA-grade TPVs thermoplastic seals.
Available versions:
-
- Wall mount: modular bracket made of carbon steel sheet, nickel finish, gauge 18.
- Patient headwall mount: same as above.
- Ceiling mount: available upon prior specification.
- Spiral locks in stainless steel.
- Mounting hardware with gas-specific registry for guide pin insertion of secondary valve, compatible with U.S. brands.
🔩 Secondary Valve
- Flat front panel in stainless steel or aluminum.
- Push-button for connecting and disconnecting secondary equipment.
- Inlet type MC70 (Swedish).
- Secured to primary valve with metric screws.
- Gas-coded inlet, compatible with MC70 (Swedish) technology.
- Automatic shut-off valve (check) in high-resistance ABS.
- FDA-grade TPVs thermoplastic seals.
- Spiral locks in stainless steel.
- Includes guide pin to prevent gas crossover, compatible with U.S. brands.
🧱 Mounting Frames
- Wall frame: made of injected Zamak with chrome finish.
- Patient headwall frame: made of high-resistance injected ABS plastic.
💨 Available Gases
- Oxygen
- Medical Air
- Medical Vacuum
- Nitrous Oxide
- Carbon Dioxide
🎨 Color Identification
- Compliant with NFPA 99
- Compliant with ISO (specify standard if greater precision is required)
📈 Technical Parameters
| Parameter | Value / Condition |
|---|---|
| Gas outlet flow rate | 240 LPM (depending on inlet diameter) |
| Extraction capacity | 90 LPM (depending on vacuum pipe diameter) |
| Secondary load capacity | Maximum: 450 g |
| Operating pressure | 50–55 PSI |
| Maximum test pressure | 100 PSI |
🔐 Safety and Compatibility
- Indexed safety pin to prevent gas crossover: Included
🛡️ Standards and Certifications
- Complies with: NFPA 99, ASTM B819, SS EN 8752430, and SS EN ISO 9170-1
- Quality system: ISO 13485, ISO 9001
📘 Installation, Operation and Maintenance Manual
This document is protected and available exclusively for equipment of our brand. To request:- Access the form in the Manuals and After-Sales Service section.
- Send an email with the required information.
- Complete the corresponding form.
Legal Notice
Intellectual and industrial property: All rights reserved.- All access to this website is subject to the following conditions: The reproduction, permanent storage and dissemination of the contents or any other use that has a public or commercial purpose is forbidden without prior written notice and approval of Grupo Arigmed S. de R.L. de C.V.
- All documents, images and contents, on this website are from the Intellectual property of Grupo Arigmed S. de R.L. de C.V., any type of copy, plagiarism or similarity in those (documents, images and contents), will be object of legal actions to avoid its use by unauthorized persons, organizations or companies, as well to compensate author´s damage caused.
