Description
Medical Gas Outlet quick connect AGA MC-70 (SWEDISH) inlet stairs type connection for each specific gas + M24 male screw type pass 1 to secondary equipment lock. Manufactured with NFPA99 and ASTM B819 compliance codes (Clean for oxygen use).
Primary Valve (Back Assembly):
- Brass made Primary valve 360°rotation, copper piping extention “K" type 10mm (internal diameter).
- Polypropylene injection ckeck valve.
- Thermoplastic injection TPVs FDA grade seals.
- Wall and Architectural (Patient Bedhead Units) Hardware Mounting Modular assembly, carbon steel sheet 18 gauge nickel finish made.
- Ceiling Hardware Mounting Modular assembly available, upon request.
- Stainless steel spiral locks.
- “Pin-Guide" No cross connection safety system die-cut corresponding to a specific medical gas type to Rough-in assembly insertion.
Secondary Valve (Rough-in Assembly):
- Stainless steel front plate made with brass feeding valve, it includes a plunger for connection and disconnection of secondary equipment, fastening to the primary valve is by millimeter screws.
- Inlet stairs connection for each specific gas correspond to AGA MC-70 (SWEDISH) technology + M24 male screw type pass 1 to secondary equipment lock.
- Brass made check valve.
- Thermoplastic injection TPVs FDA grade seals.
- Stainless steel spiral locks.
- ABS plastic injection trim wall plate chrome finish, same material to architectural equipments trim plate, chrome finish.
- “Pin-Guide" No cross connection safety system corresponding to a specific medical gas type to Back-assembly reception.
- zamak chrome finish trim wall plate option (upon request).
Remark:
- Sale only to Mexico.
Medical Gas Outlet Flow:
- 240 L.P.M. gas flow (if diameters of the main medical gas piping allow it).
- 90 L.P.M. to medical vacuum extraction (if diameters of the main medical vacuum piping allow it).
Load Capacity:
- 450g Maximum load capacity.
- It should not be cleaned with “CHLORINE" or its derivatives, it could cause corrosion in stainless steel.