Medical Air Scroll Compressor System

ISO 8573-1:2010 Certified Arigmed´s Scroll Oilfree Medical Air Compressor System meeting with NFPA99 and another Codes.

Scroll Compressors:

• Hitachi oil-free scroll compressor, 50-55 PSI working pressure and a maximum of 140 PSI, belt driven transmission, 220v, 60htz electric motor, (other voltages must be specified in advance to the factory).
• Carbon steel platform powder coating finish mounted, it includes anti-vibration rubber pads.
• Air-air type primary aftercooler at the outlet.
• Made in Japan.

Air Refrigerated AfterCoolers:

• Main air refrigerated aftercooler with block multiple connection, includes: relief, back-flow and automatic valves, humidity filter for each scroll compression unit.
• Secondary Air Refrigerated Aftercoolers, stainless steel and copper tubing made with aluminium cooler heat sink fins, includes a multiple connection block with relief, backflow and automatic valves for each compression unit.

Air Vessel:

• Air vessel under ASME specification with internal and external treatment (may include a man access hatch for maintenance and internal cleaning).
• ASME stamped by the manufacturer (ASME stamp is only avilable for vessels without man access hatch).

Control Panel:

• Electrical-electronic control panel to coordinate  alternation, simultaneous use and stop, as well as the control of the Regeneration Air treatment system.
• NFPA99 specified alarm detection and maintenance alert, NEMA12 class enclosure.
• 7 ” (inches) touch screen display to control and view of compressor operation status.

Filter System:

• Moisure filters, 1 micron particle filters, antibacterial optionals filters and a final line pressure regulator, all systema by duplicate.

Air Quality Monitors:

• High level Carbon Monoxide Monitor detection.
• High level Dew Point detection.

Regenerative Air Dryer System:

• Dual tower regenerative type dryers with normally open automatic valves controlled from the compressor system control panel, -40°c air drying temperature. Air dryer system by duplicate.

Relay Output Data:

• It includes a Relay data output (dry contact) connection of the master panel alarm source equipments.

Designed for Use:

• Medical, exclusive to Clinics and Hospitals.

Compliance Regulations:

• NFPA99

Certificates:

Warning

• To quote, user must be inform about Medical Air consumption required in SCFM (standard cubic feet per minute) under all requires of NFPA99-2015 and 2018
• Consult Delivery Capabilities of each sytem in SCFM on Technical Data Sheet.
• Indoor Use Only.
• The factory is not responsible in the case of equipment failure due to wrong calculation to size the equipment and lack of maintenance.